Engineering, 18.03.2021 01:10 cheath104

Past evidence shows that when a customer complains of an out-of-orderphone there is an 8% chance that the problem is with the inside wiring. During a 1-month period,100 complains are lodged. Assume that there have been no wide-scale problems that could beexpected to affect many phones at once, and that, for this reason, these failures are consideredto be independent. Required:
a. Find the expected number of failures due to a problem with the inside wiring.
b. Find the probability that at least 10 failures are due to a problem with the inside wiring.
c. Would it be unusual if at most 5 were due to problems with the inside wiring? Explain, based on the probability of this occurring.

Answers: 2

Show answers

Answers

Answer from: bbbbbbbbbbbb62

a. The expected number of failures due to a problem with inside wiring is 8 failures

b. The probability that at least 10 failures are due to inside wiring is approximately 0.176

c. It will be not unusual

Explanation:

The probability that the problem of an out of order is the inside wiring, P(x) = 8%

The number of complaints in a month period, x = 100

a. The expected number of failures due to a problem with inside wiring, E(x) = x·P(x)

∴ E(x) = 100 × 8% = 8

The expected number of failures due to a problem with inside wiring, E(x) = 8 failures

b. The probability that at least 10, P₁₀, failures are due to inside wiring is given as follows;

The probability of success, P = 0.08, therefore, the probability of failure, q = 1 - 0.08 = 0.92

P = _nC_r · P^r · $q^{n-r}$

P₀ = ₁₀₀C₀·(0.08)⁰·(0.92)¹⁰⁰ = 0.000239211874657

P₁ = ₁₀₀C₁·(0.08)¹·(0.92)⁹⁹ = 0.00208010325

P₂ = ₁₀₀C₂·(0.08)²·(0.92)⁹⁸ = 0.00895348793

P₃ = ₁₀₀C₃·(0.08)³·(0.92)⁹⁷ = 0.02543309616

P₄ = ₁₀₀C₄·(0.08)⁴·(0.92)⁹⁶ = 0.0536306593

P₅ = ₁₀₀C₅·(0.08)⁵·(0.92)⁹⁵ = 0.0895398833653

P₆ = ₁₀₀C₆·(0.08)⁶·(0.92)⁹⁴ = 0.123279549561

P₇ = ₁₀₀C₃·(0.08)⁷·(0.92)⁹³ = 0.143953759735

P₈ = ₁₀₀C₈·(0.08)⁸·(0.92)⁹² = 0.145518474516

P₉ = ₁₀₀C₉·(0.08)⁹·(0.92)⁹¹ = 0.129349755125

P₁₀ = ₁₀₀C₁₀·(0.08)¹⁰·(0.92)⁹⁰ = 0.10235502362

∴ P₀ + P₁ + P₂ + P₃ + P₄ + P₅ + P₆ + P₇ + P₈ + P₉ + P₁₀ = 0.82433004464

The probability of at least 10 failures are due problem with the inside wiring = 1 - (P₀ + P₁ + P₂ + P₃ + P₄ + P₅ + P₆ + P₇ + P₈ + P₉ + P₁₀) = 1 - 0.82433004464 = 0.175666995536

The probability of at least 10 failures are due problem with the inside wiring = 0.175666995536 ≈ 0.176

c. The probability of at most 5 failures are due problem with the inside wiring = P₀ + P₁ + P₂ + P₃ + P₄ + P₅ = 0.179876441908

Therefore, given that probability of at most 5 failures > The probability of 8 failures it will be not unusual since the cause of failure is more (92%) due to other causes which are more likely and therefore increase in the probability that there are fewer failures due inside wiring

Answer from: Quest

answer:

my guess it 8 i'm probably wrong

Answer from: Quest

answer:

not sure

explanation:

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?

Answers: 2

Answer

You know the right answer?

Past evidence shows that when a customer complains of an out-of-orderphone there is an 8% chance tha...

Questions