Engineering, 18.03.2021 01:20 rosehayden21
An uncharged capacitor is connected to a resistor and a battery. Choose what happens to current, potential difference and charge right after the circuit is closed. An uncharged capacitor is connected to a resistor and a battery. Choose what happens to current, potential difference and charge right after the circuit is closed.
Potential difference across the capacitor starts high and then drops exponentially.
Current through the circuit starts with zero and then increases gradually to a maximum value.
Charge on the plates of the capacitor decreases with time.
Charge on the plates of the capacitor increases with time.
Charge on the plates of the capacitor doesn't change with time.
Potential difference across the capacitor starts with zero and then increases gradually to a maximum value.
Current through the circuit starts high and then drops exponentially.
Answers: 3
![Q_{0} [ 1 - e^{\frac{-t}{RC} } ]](/tpl/images/1196/3480/05314.png)
as the value of (t) increases the value of Q increases i.e. charge on the plates![V_{0} [ 1 - e^{\frac{-t}{RC} } ]](/tpl/images/1196/3480/d9f74.png)
Another question on Engineering
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 18:20
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.
Answers: 2
Engineering, 04.07.2019 19:10
Acircular aluminum shaft mounted in a journal is shown. the symmetric clearance gap between the shaft and journal is filled with sae 10w-30 oil at t 30°c. the shaft is caused to turn by the attached mass and cord. develop and solve a differential equation for the angular speed of the shaft as a function of time.
Answers: 2
You know the right answer?
An uncharged capacitor is connected to a resistor and a battery. Choose what happens to current, pot...
Questions
History, 04.03.2020 04:23
Mathematics, 04.03.2020 04:23
Computers and Technology, 04.03.2020 04:23
Computers and Technology, 04.03.2020 04:23
English, 04.03.2020 04:23
