Engineering, 22.03.2021 19:40 kittycatwaffels

Because he is concerned about building materials entering the marketplace that are marketed as sustainable or renewable but that aren’t really any such thing, Rafael of Incipient Renewable Construction creates a consumer watchdog group to identify such products. The group rates products on a scale that indicates how reliable the green claims for the products are. He wants to force the makers and suppliers of these materials to either be more honest about their claims or pull these products from the market. Rafael’s efforts will be most effective at improving which of the following? (Select all that apply.) A. coordination between voluntary consumer groups and government agencies
B. industry knowledge regarding green building products
C. research efforts into new green building products
D. consumer confidence regarding green materials and technology

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

Answer

Engineering, 04.07.2019 19:10

What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.

Answers: 1

Answer

You know the right answer?

Because he is concerned about building materials entering the marketplace that are marketed as susta...

Questions