Engineering, 23.03.2021 16:30 edjiejwi
A 4 stroke over-square single cylinder engine with an over square ratio of 1.1,the displacement volume of the engine is 245cc .The clearance volume is 27.2cc the bore of this engine is ?
Answers: 1
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
A 4 stroke over-square single cylinder engine with an over square ratio of 1.1,the displacement volu...
Mathematics, 26.02.2021 17:50
Chemistry, 26.02.2021 17:50
Health, 26.02.2021 17:50
Chemistry, 26.02.2021 17:50
Mathematics, 26.02.2021 17:50
Physics, 26.02.2021 17:50
Mathematics, 26.02.2021 17:50
Biology, 26.02.2021 17:50
Mathematics, 26.02.2021 17:50
Mathematics, 26.02.2021 17:50
English, 26.02.2021 17:50