Engineering, 25.03.2021 19:30 sclifton2014
A shaft and hole have a nominal diameter of 1 in. The shaft has a tolerance of 0.003in, the hole has a tolerance of 0.004in and the allowance is set at 0.001in. The dimensions are based on the Basic Hole System. Show the deviations for the shaft and the hole from nominal size; calculate the maximum and minimum clearance for two mating parts.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
Engineering, 04.07.2019 18:20
Prove the equivalence between the two statements of the 2nd law of thermodynamics (i.e., a violation of one statement leads to the violatio the other statement)
Answers: 2
You know the right answer?
A shaft and hole have a nominal diameter of 1 in. The shaft has a tolerance of 0.003in, the hole has...
Questions
English, 20.02.2020 18:58
Mathematics, 20.02.2020 18:58
History, 20.02.2020 18:58
Computers and Technology, 20.02.2020 18:59
Health, 20.02.2020 18:59
Mathematics, 20.02.2020 18:59
English, 20.02.2020 18:59
Computers and Technology, 20.02.2020 18:59
Computers and Technology, 20.02.2020 18:59
