Engineering, 01.04.2021 15:20 makayla2583

Option A: Steel is an alloy made of iron and various combinations of metals depending on the job at hand. Carbon steel is dull, vulnerable to corrosion, and is exceptionally strong. These traits make carbon steel ideal for manufacturing knives, high-tension wires, automotive parts, and other similar items. Alloy steel is a mixture of metals like nickel, copper, and aluminum. These tend to be cheaper, more resistant to corrosion, and are used in car parts, pipelines, ship hulls, and mechanical projects. The strength depends on the concentration of the elements it contains. Tool steel is very hard, heat and scrape resistant, and is used to make metal tools like hammers. They are usually made from cobalt, molybdenum, and tungsten. Stainless steel is mainly mixed with chromium which allows the steel to be resistant to corrosion and very easily molded into varying shapes. Stainless steel can be found in surgical equipment, home applications, silverware, and even implemented as exterior cladding for commercial / industrial buildings. What three properties of metallic bonds make them ideal for these jobs

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

Answers: 3

Answer

You know the right answer?

Option A: Steel is an alloy made of iron and various combinations of metals depending on the job at...

Questions