Engineering, 01.04.2021 23:00 Eni1127
While discussing voltage drop: Technician A says voltage drops in a closed circuit must equal source
voltage. Technician B says that voltage drops can be calculated by multiplying circuit voltage times the
load's resistance. Who is correct?
Answers: 2
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
While discussing voltage drop: Technician A says voltage drops in a closed circuit must equal source...
Chemistry, 01.12.2020 20:00
Mathematics, 01.12.2020 20:00
English, 01.12.2020 20:00
Mathematics, 01.12.2020 20:00
Social Studies, 01.12.2020 20:00
Physics, 01.12.2020 20:00
Mathematics, 01.12.2020 20:00
Mathematics, 01.12.2020 20:00
Physics, 01.12.2020 20:00
History, 01.12.2020 20:00