Engineering, 02.04.2021 04:50 Symonek
The water level in a tank is 20 meters above the ground. A hose is connected to the bottom of the tank at the ground level and the nozzle at the end of hose is pointed straight up. The tank cover is airtight, but the pressure over the water surface is unknown. Determine the minimum tank air pressure (gage) that will cause a water stream from the nozzle to rise 30 meters from the ground if friction head loss at the hose is determined to be 5 meters.
Answers: 3
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Engineering, 04.07.2019 18:10
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
The water level in a tank is 20 meters above the ground. A hose is connected to the bottom of the ta...
Computers and Technology, 16.09.2019 09:30
Chemistry, 16.09.2019 09:30
Mathematics, 16.09.2019 09:30
Mathematics, 16.09.2019 09:30
Mathematics, 16.09.2019 09:30
Arts, 16.09.2019 09:30
Spanish, 16.09.2019 09:30
Mathematics, 16.09.2019 09:30
Mathematics, 16.09.2019 09:30
Geography, 16.09.2019 09:30
Mathematics, 16.09.2019 09:30