Engineering, 02.04.2021 15:30 ely093

An inventor lives near a mountain that in the summertime has a temprature of 40 degrees farenheit at the top. A tubing line could be run in a loop from the base of the mountain to the top. It would be insulated the entire length, except at the top of the mountain and at the base, where appropriate equipment connects to the loop in order to drive a heat engine. The average temprature at the base of the mountain during summer is 100 degrees farenheit 10lbs/s if R-134a flows through the system. At the base of the mountains, ambient air transfers heat to the refrigerant, and takes it from 40 degress farenheit sub-cooled liquid to 100 degree farenheit at 100 psia. Find:1. Computer the maximum theoretical efficiency of any heat engine operated netween the two temprature2. Compute the rate of heat input to the enginge3. Compute the maximum theoretical power output of the engine (hp)

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

Answers: 1

Answer

You know the right answer?

An inventor lives near a mountain that in the summertime has a temprature of 40 degrees farenheit at...

Questions