Engineering, 02.04.2021 21:00 jakobrobinette
Consider the CSTR with first order reaction and the process parameters and variables are given by: The process parameters and variables are defined as: CA0 = feed concentration = 2.7 mol/L. Cp = heat capacity of the reactor feed and product (1000 cal/kg*K) = Cv. E/R = normalized activation energy (20,000 K). F = mass feed rate and product rate (10 kg/s). k0 = rate constant (1.97Ã10^24 1/s). Q = heat addition rate (initially 700,000 cal/s). T0 = feed temperature = 380 K. Vr = reactor volume (100 L). Density of the reactor feed and product (1 kg/L). DHrxn = heat of reaction = 115,400 cal/mol.
a. Determine the reaction rate constant k when the temperature is 491 K. For (a) and (b) reaction rate constant k = 0.10 1/s at the initial steady state.
b. Determine the initial steady state reactant concentration CAs in the tank.
c. Determine the initial steady state temperature in the tank using energy balance.
Answers: 3
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 19:20
Afan that can provide air speeds up to 60 m/s is to be used in a low-speed wind tunnel with atmospheric air at 35 c. if one wishes to use the wind tunnel to study flat-plate boundary layer behavior up to reynolds numbes of re 10, what is the minimum plate length that should be used? at what distance from the leading edge would transition occur if the critical reynolds nurnber were rer,e = 5 × 105?
Answers: 2
Consider the CSTR with first order reaction and the process parameters and variables are given by: T...
History, 13.03.2020 17:00
Computers and Technology, 13.03.2020 17:01
Computers and Technology, 13.03.2020 17:01
Mathematics, 13.03.2020 17:02
Mathematics, 13.03.2020 17:02
Mathematics, 13.03.2020 17:02