Engineering, 06.04.2021 01:00 shawny5

In an afterburning jet engine during a static test, the fluid entering the after- burner has a temperature of 900 K, a pressure of 0.235 MPa and a mass flow rate of 75 kg/s. These conditions are maintained with and without operation of the afterburner. Without afterburning, the stagnation pressure loss be- tween afterburner entrance and exit is 3 percent and the specific heat ratio of the fluid in the nozzle is 1.33. When the afterburner is operating, the exit stagnation temperature rises to 1800 K, the stagnation pressure loss changes to 8 percent and the specific heat ratio in the nozzle drops to 1.29. In both cases the nozzle flow is simply converging and choked. Determine the re- quired nozzle exit area in both cases.

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Answers: 3

Answer

You know the right answer?

In an afterburning jet engine during a static test, the fluid entering the after- burner has a tempe...

Questions