Engineering, 12.04.2021 15:40 debbieparr4536
An element in plane stress is subjected to compressive stresses of magnitude . in the horizontal direction and tensile stresses of magnitude . in the vertical direction (see figure). Q-Also, shear stresses of magnitude . act in the directions shown.
(a) Determine the stresses acting on an element oriented at a clockwise angle of 40° from the horizontal.
(b) Determine the maximum shear stresses and associated normal stresses. Using Mohr’s circle and show them on a sketch of a properly oriented element.
Answers: 3
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
An element in plane stress is subjected to compressive stresses of magnitude . in the horizontal dir...
History, 28.06.2019 03:00
Mathematics, 28.06.2019 03:00
Biology, 28.06.2019 03:00
Biology, 28.06.2019 03:00
Mathematics, 28.06.2019 03:00
Mathematics, 28.06.2019 03:00
English, 28.06.2019 03:00
Mathematics, 28.06.2019 03:00
Mathematics, 28.06.2019 03:00