subject
Engineering, 12.04.2021 23:40 kennyduong04

g Consider an adiabatic water pump with following operating condition: the mass flow rate through the pump is 1 kg/sec; enthalpy at the entry is 100 kJ/kg; enthalpy at the exit is 250 kJ/kg; entropy at the entry is 2.0 kJ/kg-K; entropy at the exit is 2.1 kJ/kg-K. The dead state is defined as 1 atm and 27 degree Celsius. The exergy destruction in the pump is

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
question
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
question
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
question
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
You know the right answer?
g Consider an adiabatic water pump with following operating condition: the mass flow rate through th...
Questions
question
Mathematics, 30.01.2020 08:45
question
Physics, 30.01.2020 08:45
question
Mathematics, 30.01.2020 08:45
Questions on the website: 13722361