Engineering, 16.04.2021 17:30 masonorourke

According to the chart, how much time is saved when you try to open a 1GB set of photos with a 3.5GHz Intel Core i7 Processor over a 1.8GHz Intel Processor? Does a higher-end CPU make a difference? TEST PC Nvidia GeForce GTX 680 8GB RAM, 256GB SSD with Single-core CPU (with Hyper- Threading) Dual-core CPU (with Hyper- Threading) Quad-core CPU (without Hyper- Threading) Quad- (with Thre CPU 1.8GHz Intel 3.4GHz Intell 3.2GHz Intel Celeron G460 Core i3-2130 Core i5-3470 3.5GH Cor 37 27 secs 23 secs How long does it take to... Open o 1GB set of 47 secs photographs Batch process o set of 5mins 39 secs photogroohs Encode several 239 3mins 35 secs 3mins 12secs 3mins

According to the chart, how much time is saved when you try to open a 1GB set of photos with a 3.5G

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m

Answers: 2

Answer

You know the right answer?

According to the chart, how much time is saved when you try to open a 1GB set of photos with a 3.5GH...

Questions