Engineering, 19.04.2021 22:50 ale1910
(6 points) Consider a simple ideal Rankine cycle with fixed boiler and condenser pressures. What is the effect of superheating the steam to a higher temperature on: a) Pump work output (increase, decrease, or remain the same) b) Turbine work output (increase, decrease, or remain the same) c) Heat supplied (increase, decrease, or remain the same) d) Heat rejected (increase, decrease, or remain the same) e) Cycle efficiency (increase, decrease, or remain the same) f) Moisture content at turbine exit (increase, decrease, or remain the same
Answers: 1
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
Engineering, 04.07.2019 18:20
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
Engineering, 04.07.2019 19:10
The proportional limit is always greater than the yield strength for a material. a)-trune b)- false
Answers: 3
Engineering, 04.07.2019 19:20
Acommercial grade cubical freezer, 4 m on a side, has a composite wall consisting of an exterior sheet of 5.0-mm thick plain carbon steel (kst= 60.5 w/m k), an intermediate layer of 100-mm thick polyurethane insulation (kins 0.02 w/m k), and an inner sheet of 5.0- mm thick aluminium alloy (kal polyurethane insulation and both metallic sheets are each characterized by a thermal contact resistance of r 2.5 x 104 m2 k/w. (a) what is the steady-state cooling load that must be maintained by the refrigerator under conditions for which the outer and inner surface temperatures are 25°c and -5°c, respectively? (b) for power saving purpose, which wall material should be increased/reduced in. thickness in order to reduce 50% of the cooling load found in part (a)? redesign the thickness of the proposed material. 177 w/m-k). adhesive interfaces between the q=575.93 w
Answers: 2
(6 points) Consider a simple ideal Rankine cycle with fixed boiler and condenser pressures. What is...
Mathematics, 22.06.2020 07:57
Mathematics, 22.06.2020 07:57
Mathematics, 22.06.2020 07:57
Mathematics, 22.06.2020 07:57
Social Studies, 22.06.2020 07:57
Mathematics, 22.06.2020 07:57
Computers and Technology, 22.06.2020 07:57
Biology, 22.06.2020 07:57