subject
Engineering, 20.04.2021 17:30 yselahernandez02

A tubular condenser containing 120 ¾-in. BWG 16 copper tube that are each 8.00ft long, condenses 22,100 lbm/hr of saturated steam at 120.0 °C using 870.0 gal/min of cooling water. The measured inlet and exit water temperatures are 20.0 °C and 46.0°C, respectively. You may assume that the wall temperature, T", is equal to the mean bulk temperature of the cooling water. a)How complete is the heat balance

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
You know the right answer?
A tubular condenser containing 120 ¾-in. BWG 16 copper tube that are each 8.00ft long, condenses 22,...
Questions
question
Mathematics, 17.05.2021 23:00
question
Mathematics, 17.05.2021 23:00
question
Mathematics, 17.05.2021 23:00
Questions on the website: 13722363