Project: Reverse Engineering Documentation and Presentation
Assignment Directions
Engi...
Engineering, 21.04.2021 16:00 tmrodriguez1
Project: Reverse Engineering Documentation and Presentation
Assignment Directions
Engineers usually work in teams with members who do not have the same level of technical knowledge. They rely on visual and graphic aids to explain and support their communication efforts. To practice these skills, write a 3- to 5-page paper that describes your suggestions for a reverse engineering project. You do not need to complete the reverse engineering project. You are presenting instead an evaluation of a product that you believe could be improved. This may include an object or product that you have reverse engineered in the past or a product that you would someday like to analyze.
Include two of the following visual and graphic aids:
Product Teardown Chart (if completed)
Function Structure Diagram
Exploded View Diagram
Morphological Matrix
Design Decision Matrix
The visual aids are not just supplemental to your presentation. They must be incorporated into your reasoning as you make design modification suggestions.
Assignment Guidelines:
a written analysis or a script for an oral presentation
two visual or graphic aids that support the presentation
Submission Requirements:
3 to 5 pages double spaced
Proper grammar and vocabulary is required.
Answers: 1
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
Engineering, 04.07.2019 18:20
A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?
Answers: 3
Engineering, 04.07.2019 18:20
An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.
Answers: 3
Engineering, 04.07.2019 19:10
What is the main objective of using reheat rankine cycle?
Answers: 3
History, 30.03.2021 18:50
Mathematics, 30.03.2021 18:50
Mathematics, 30.03.2021 18:50
Mathematics, 30.03.2021 18:50
Mathematics, 30.03.2021 18:50
Mathematics, 30.03.2021 18:50
Social Studies, 30.03.2021 18:50
Mathematics, 30.03.2021 18:50