A CUSTOMER BRINGS HER CAR INTO THE SHOP WITH A COMPLAINT THAT BOTH
HEADLIGHTS ARE NOT WORKING.
TECHNICIAN A SAYS TO CHECK THE CONDITION OF THE BULBS FIRST. TECHNICIAN B CHECKS THE FUSE IN THE HEADLIGHT CIRCUIT & THEN TESTS THE OPERATION OF THE HEADLIGHT SWITCH WHO IS CORRECT AND WHY ?
HELP ME ASAP

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?