Engineering, 22.04.2021 18:50 PoTubbs
50 Pts) A factory has the following loads connected to its 480 V, 60 Hz line: • A large induction motor uses 147.3 KW of power at power factor of 0.773 lagging. • A 62 KVAR capacitor • A lighting load of 21 kW. Draw a power triangle for each device. Draw a power triangle for the entire factory. Calculate the current flow in the power line feeding the factory. Show your calculations of P, Q and S.
Answers: 3
Engineering, 04.07.2019 18:10
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
Engineering, 04.07.2019 18:10
Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer
Answers: 2
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
Engineering, 04.07.2019 19:10
Tom is having a problem with his washing machine. he notices that the machine vibrates violently at a frequency of 1500 rpm due to an unknown rotating unbalance. the machine is mounted on 4 springs each having a stiffness of 10 kn/m. tom wishes to add an undamped vibration absorber attached by a spring under the machine the machine working frequency ranges between 800 rpm to 2000 rpm and its total mass while loaded is assumed to be 80 kg a) what should be the mass of the absorber added to the machine so that the natural frequency falls outside the working range? b) after a first trial of an absorber using a mass of 35 kg, the amplitude of the oscillation was found to be 10 cm. what is the value of the rotating unbalance? c) using me-3.5 kg.m, find the optimal absorber (by minimizing its mass). what would be the amplitude of the oscillation of the absorber?
Answers: 3
50 Pts) A factory has the following loads connected to its 480 V, 60 Hz line: • A large induction mo...
English, 13.12.2021 16:10
Computers and Technology, 13.12.2021 16:10
English, 13.12.2021 16:10
Advanced Placement (AP), 13.12.2021 16:10
SAT, 13.12.2021 16:20
Biology, 13.12.2021 16:20
Computers and Technology, 13.12.2021 16:20