Engineering, 23.04.2021 16:00 mattwe4567893987654
Design a 4-basin chlorine disinfection system for a plant with a winter average flow of 10.5MGD and a summer average flow of 12.8MGD, using an 8-ft deep, serpentine-channel, chlorine gas disinfection, sulfur dioxide dechlorination, and reaeration before discharge. Use 6-channels per basin. 1. Based on a 90-minute winter contact time and a channel D:W = 1:1, determine:
(a) Volume of each basin
(b) Surface area of each basin
(c) Channel width in each basin
(d) Total channel length in each basin
(e) What is the L:W each basin? Does it satisfy general geometry recommendations?
(f) Construction length of a basin
(g) Construction width of a basin
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 18:10
The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
Engineering, 04.07.2019 18:20
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
You know the right answer?
Design a 4-basin chlorine disinfection system for a plant with a winter average flow of 10.5MGD and...
Questions
Business, 30.06.2019 16:50
Mathematics, 30.06.2019 16:50
History, 30.06.2019 16:50
History, 30.06.2019 16:50
World Languages, 30.06.2019 16:50
Geography, 30.06.2019 16:50
Business, 30.06.2019 16:50
