Engineering, 24.04.2021 01:00 Leonorareed5145
Consider a circular cross-section which experiences an internal torsional load T=17 Nm, an internal bending moment M_y=24 Nm, and an internal shear force V= 10 kN. All loads act in the directions shown in the figure below. The cross-section has a diameter, d=69 mm.
Given these internal loads in the cross-section, calculate the stresses at point B.
Determine the normal stress, alphaB, and shear stress tauB, at point B in MPa.
ans: SigmaB = 0.7441, TauB = -28.7895
I need help getting to the answer. Thank you.
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
You know the right answer?
Consider a circular cross-section which experiences an internal torsional load T=17 Nm, an internal...
Questions
Health, 23.07.2019 19:00
Physics, 23.07.2019 19:00
Geography, 23.07.2019 19:00
Mathematics, 23.07.2019 19:00
Social Studies, 23.07.2019 19:00
Mathematics, 23.07.2019 19:00
English, 23.07.2019 19:00
English, 23.07.2019 19:00
