Engineering, 24.04.2021 15:40 22chandlerlashley

PROBLEM 1 A spherical, cryosurgical probe may be imbedded in diseased tissue for the purpose of freezing, and
thereby destroying the tissue. Consider a probe of 3 diameter whose surface is maintained at
−30 ℃ when imbedded in tissue that is at 37 ℃. A spherical layer of frozen tissue forms around the
probe, with a temperature of 0 ℃ existing at the interface between the frozen and normal tissue. If
the thermal conductivity of frozen tissue is approximately 1.5 /(.) and heat transfer at the
interface may be characterized by an effective convection coefficient of 50 /2
., what is the
thickness of the layer of frozen tissue? Assume negligible perfusion

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

Answers: 1

Answer

You know the right answer?

PROBLEM 1 A spherical, cryosurgical probe may be imbedded in diseased tissue for the purpose of fr...

Questions