subject
Engineering, 27.04.2021 14:50 Melissamv2052

. In a water cooling tower air enters at a height of 1 m above the ground level with velocity of 20 m/s and leaves the tower at a height of 7 m above the ground level with a velocity of 30 m/s. Water enters the tower at a height of 8 m above the ground level with a velocity of 3 m/s and leaves the tower at a height of 0.8 m with a velocity of 1 m/s. Water temperatures at inlet and exit are 800C and 500C respectively, while the inlet and exit temperatures of air are 300C and 700C respectively. The cooling tower is well insulated and a of 2.25 kW drives the air through the cooling tower. Determine the mass flow rate of air required if the mass flow rate of water is 1.5 kg/s.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
question
Engineering, 04.07.2019 18:20
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
question
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
question
Engineering, 04.07.2019 18:20
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
You know the right answer?
. In a water cooling tower air enters at a height of 1 m above the ground level with velocity of 20...
Questions
question
Mathematics, 20.08.2019 22:50
question
Mathematics, 20.08.2019 22:50
question
Mathematics, 20.08.2019 22:50
Questions on the website: 13722363