subject
Engineering, 28.04.2021 01:00 Bucsan8688

Un distribuidor obtiene una utilidad de $20 por artículo si es embarcado de la fábrica en perfectas condiciones y si llega a tiempo, pero la reduce en $2 si no llega a tiempo y en $12, sin importar el hecho de que llegue a tiempo, si no es embarcada desde la fábrica en perfectas condiciones. Si el 70% de los artículos son embarcados en perfectas condiciones y llegan a tiempo, el 10% son embarcadas en perfectas condiciones, pero no llegan a tiempo y el 20% no son embarcadas en perfectas condiciones, Cuál es la utilidad neta que puede esperar el distribuidor.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
question
Engineering, 04.07.2019 18:20
Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k
Answers: 2
question
Engineering, 04.07.2019 19:10
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
You know the right answer?
Un distribuidor obtiene una utilidad de $20 por artículo si es embarcado de la fábrica en perfectas...
Questions
question
Mathematics, 19.10.2021 20:00
question
Mathematics, 19.10.2021 20:00
question
English, 19.10.2021 20:00
question
English, 19.10.2021 20:00
question
Mathematics, 19.10.2021 20:00
Questions on the website: 13722360