Engineering, 28.04.2021 18:40 jamayeah02

The typical soda can is 2.5 inches in diameter and 4.5 inches high. You would think that the cans would be designed such that the total surface area is minimized, thus minimizing total material costs. However, the size of a soda can (2.5 inches in diameter and 4.5 inches high) is NOT the optimum size that minimizes total surface area. a. Using Matlab, solve for the size of a can that would minimum total surface area that has the same volume as the typical soda can (2.5 inches in diameter and 4.5 inches high). b. Based upon your result from part a, why do you think soda cans are designed the way that they are

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Analyze the factors that influence the choice between the following pairs of processes to make the products indicated: i) sand casting versus die casting of an electric-motor housing ii) thread rolling versus machining of a bolt for high-strength application. (co3/c5)

Answers: 3

Answer

You know the right answer?

The typical soda can is 2.5 inches in diameter and 4.5 inches high. You would think that the cans wo...

Questions