Side A - 148'
Side B - 656'
Side C - 132'
1. How many metal T-Post needed to com...
Engineering, 29.04.2021 18:50 trillsmith
Side A - 148'
Side B - 656'
Side C - 132'
1. How many metal T-Post needed to complete the project?
2. How many metal and wood post needed to complete the project if both are used?
3. How much woven wire needed if that is used as the chosen fence product?
4. How much barbed wire needed if that is used as the chosen fence product?
5. How much would the project cost if woven wire is chosen? (detail your cost per product)
6. How much would the project cost if barbed wire is chosen? (detail your cost per product)
Answers: 2
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Advanced Placement (AP), 19.04.2020 08:19
Mathematics, 19.04.2020 08:19
History, 19.04.2020 08:20
English, 19.04.2020 08:20
Advanced Placement (AP), 19.04.2020 08:20
Computers and Technology, 19.04.2020 08:20
English, 19.04.2020 08:21
Physics, 19.04.2020 08:31
Mathematics, 19.04.2020 08:31
Mathematics, 19.04.2020 08:31
English, 19.04.2020 08:31
Chemistry, 19.04.2020 08:31
Mathematics, 19.04.2020 08:31