Engineering, 30.04.2021 20:00 djs1002

- Input the input signal to the system that models the amount of amoxicillin in blood and interstitial fluid. Generate a discrete output signal to help you tell how the concentration changes as a function of time. It is recommended that you use units of [μg/mL] to perform this task. Consider the following values for the physiological constants: k=1.12[h^-1]

V=42 000 [mL] (interstitial fluid and plasma volume in a 70 kg subject).

- Based on your analysis above determine in what time the maximum concentration of amoxicillin in the system is obtained. What is the maximum concentration?

note: V(dC/dt)=f(t)−kVC

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

Answer

You know the right answer?

- Input the input signal to the system that models the amount of amoxicillin in blood and interstiti...

Questions