A biomedical transducer can be represented by a series RLC circuit with a 100 ohm resistors and unknown capacitor and inductor. Analysis of the transducer in the lab indicated that the damping coefficient is 0.4 and natural resonance frequency is 159 Hz. Determine the values for the capacitive and the inductive components. Discuss the way to increase the damping coefficient to 0.707 without affecting the natural resonance frequency.

Liquid flows at steady state at a rate of 2 lb/'s through a pump, which operates to raise the elevation of the liquid 100 ft from control volume inlet to exit. the liquid specific enthalpy at the inlet is 40.09 btu/lb and at the exit is 40.94 btub. the pump requires 3 btu/s of power to operate. if kinetic energy effects are negligible and gravitational acceleration is 32.174 tt/s, the heat transfer rate associated with this steady state process is most closely 1)-2,02 btu/s from the liquid to the surroundings 2)-3.98 btu/s from the surroundings to the liquid. 3)-4.96 btu/s from the surroundings to the liquid. 4)-1.04 btu/s from the liquid to the surroundings.