Engineering, 02.05.2021 22:20 bigboyethanlanp2s9lm

Beetroot is fed as stream to a crusher 500 kgh The crushed material mixer where it is mixed with water that enters the mineras stream 2. The me
stream? is also 500 kgh Stream 4 then enters a filter where the insoluble
removed as stream 5 Stream 6 is the product stream
Stream I contains 75 (mm) water. 175 mm) sugar and the remaining 15
contains 25 im mi soluble solids (SS) and 75 mm insoluble olid 1 All the
that enter in stream I leave in stream 3 The composition of streams 3 mm
$$0.9 (m/m) %, sugar = 8.4 (m/m) and water = 84.4 mm. Determine the
of all the components
streams 5 and 6

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

Answer

Engineering, 04.07.2019 19:10

The air in an automobile tire with a volume of 0.015 m3 is at 32°c and 140 kpa gage. determine the amount of air that must be added to raise the pressure to the recommended value of 206 kpa gage. assume the atmospheric pressure to be 128 kpa and the temperature and the volume to remain constant.[r-0.287 kj/kgk]

Answers: 3

Answer

Engineering, 06.07.2019 03:10

Asolid steel sphere (k=63.9 w m-1 k-1 , ? =7832 kg m-3 , c=0.523 kj kg-1 k-1 ), 100 mm in diameter is initially at a uniform temperature of 500o c and is suddenly quenched in a large oil bath for which t? = 100o c and h = 3200 w m-2 k-1. estimate the time required for the sphere to cool to 200o c and to 110o c

Answers: 1

Answer

Engineering, 06.07.2019 04:20

Consider the transfer function for a first-order system g(s)=12(s+7)/(s^2+2s+9) for this system determine: a) poles and zeros of the function, b) the natural frequency and damping ratio, c) the peak value achieved in response to a unit step input, d) the peak time for a unit step input, e) the steady-state system response to a unit step input

Answers: 2

Answer

You know the right answer?

Beetroot is fed as stream to a crusher 500 kgh The crushed material mixer where it is mixed with w...

Questions