subject
Engineering, 04.05.2021 17:20 Cooldude497

Pseudomonas methylotrophus is used to produce single cell protein from methanol in a 1000-m3 pressure-cycle airlift fermenter. The biomass yield from substrate is 0.41 gg1, K, is 0.7 mg L1, and the maximum specific growth rate is 0.44 h-1. The medium contains 4% (w/v) methanol. A substrate conversion of 98% is desirable. The reactor may be operated in either batch or continuous mode. If operated in batch, an inoculum of 0.01% (w/v) is used and the downtime between batches is 20 h. If continuous operations are used at steady state, a downtime of 25 days is expected per year. Neglecting maintenance requirements, compare the annual biomass production achieved using batch and continuous reactors.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
You know the right answer?
Pseudomonas methylotrophus is used to produce single cell protein from methanol in a 1000-m3 pressur...
Questions
question
Business, 27.04.2021 16:30
question
Mathematics, 27.04.2021 16:30
question
Mathematics, 27.04.2021 16:30
question
History, 27.04.2021 16:30
Questions on the website: 13722367