Engineering, 05.05.2021 17:00 reearamrup27
Garden City is finalizing the design of an activated sludge WWTP and has the following design information available. Design Flowrate = 4 MGD; Plant Water Temperature = 22°C.
A) Design the Activated Sludge Tank for the WWTP. Using the design information below, determine: (a) the substrate, S, concentration in mg/L in the activated sludge tank, (b) the detention time of the tank in hours, and (c) the volume of the tank in m3 . Again, Q = 4 MGD.
B) Design the Activated Sludge Tank for the WWTP (continued). Using the design information given in the previous problem, calculate the: (a) cell wasting (Qw) and (b) cell recycling (Qr) rates in MGD for the tank. (c) What is the value of the F:M ratio in mg BOD5/mg MLVSS-day? Is this value acceptable? Use the equations below to calculate cell wasting and recycling rates: Qr/Q = X/(Xr-X) and Qw = (VX)/(θCXr)
Activated Sludge Tank Design Information:
MCRT (c) Ks | 10 days 100 mg/L 0.5 0.05/day 2.5/day Xo, Xe Negligible | 3,500 mg/L MLVSS 10,000 mg/L MLVSS Influent BOD5 | 220 mg/L Y Xr kd Um
Answers: 1
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79
Answers: 1
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:20
Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.
Answers: 2
Garden City is finalizing the design of an activated sludge WWTP and has the following design inform...
Mathematics, 19.02.2021 19:30
Mathematics, 19.02.2021 19:30
Mathematics, 19.02.2021 19:30
Mathematics, 19.02.2021 19:30
English, 19.02.2021 19:30
Physics, 19.02.2021 19:30
History, 19.02.2021 19:30
Mathematics, 19.02.2021 19:30
English, 19.02.2021 19:30