Engineering, 06.05.2021 02:30 murtaghliam1

I’ll cshapp 20: Reverse Engineering Documentation and Presentation Assignment Directions

Engineers usually work in teams with members who do not have the same level of technical knowledge. They rely on visual and graphic aids to explain and support their communication efforts. To practice these skills, write a 3- to 5-page paper that describes your suggestions for a reverse engineering project. You do not need to complete the reverse engineering project. You are presenting instead an evaluation of a product that you believe could be improved. This may include an object or product that you have reverse engineered in the past or a product that you would someday like to analyze.

Include two of the following visual and graphic aids:

Product Teardown Chart (if completed)
Function Structure Diagram
Exploded View Diagram
Morphological Matrix
Design Decision Matrix
The visual aids are not just supplemental to your presentation. They must be incorporated into your reasoning as you make design modification suggestions.

Assignment Guidelines

a written analysis or a script for an oral presentation
two visual or graphic aids that support the presentation
Submission Requirements:

3 to 5 pages double spaced

Proper grammar and vocabulary is required.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.

Answers: 1

Answer

Engineering, 04.07.2019 19:10

An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed

Answers: 3

Answer

You know the right answer?

I’ll cshapp 20: Reverse Engineering Documentation and Presentation Assignment Directions

Questions