Engineering, 06.05.2021 22:20 AnNguyen
Consider a plate whose top surface is being cooled by air where as the bottom surface is exposed to a hot stream at 200 C with a convection heat transfer coefficient of 35 W/m2 .K. The air thermal conductivity is 0.243 W/m. K whereas the thermal conductivity of the plate is about 237 W/m. K. If the bottom surface of the plate 150 C, determine the temperature gradient in the air and the temperature gradient in the plate at the top surface of the plate.
Answers: 3
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 18:20
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
Consider a plate whose top surface is being cooled by air where as the bottom surface is exposed to...
Computers and Technology, 30.11.2020 21:40
English, 30.11.2020 21:40
Mathematics, 30.11.2020 21:40
English, 30.11.2020 21:40