subject
Engineering, 07.05.2021 16:50 123abc321cbaabc

A cylindrical vessel of diameter D drains through an orifice of diameter DO at the bottom of the vessel. The pressure in the vessel is maintained at atmospheric pressure. Derive an expression for the height of the liquid in the vessel as a function of time, and state your simplifying assumptions. Use the expression you derived to calculate the time at which the height reaches half of its original value or 0.25 m. Also find the height when the time is 20 s. For the second part use the following data: D=5 cm, DO=5 mm, initial height h0=0.5 m

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
question
Engineering, 04.07.2019 19:10
Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.
Answers: 2
question
Engineering, 04.07.2019 19:20
Determine the time of the day and month of the year at which the peak sensible cooling load occurs for a top floor, north-eastern corner room of an office building in durban for the following conditions: floor area: 8 x 8 x 3 m east and north walls: 115 mm face brick (outside), 20 mm air space, 115 mm ordinary brick (inside) with 15 mm plaster roof construction: suspended plasterboard ceiling, 450 mm air space, 150 mm concrete, 75mm screed, waterproofing no heat transfer across other surfaces window area 3x 1,5 m high in north wall only. ordinary glass with venetian blinds. lights and occupants : from 07: 00 to 18: 00 average light density: 25 w/m2 number of occupants : 5 seated, light office work room temperature 24°c
Answers: 3
question
Engineering, 06.07.2019 02:30
On solidification from a melt, the polymer polyethylene forms a semi-crystalline spherulite structure. (i) sketch an individual spherulite and label the amorphous and crystalline regions. (ii) draw a schematic to show the changes in specific volume with temperature during cooling from the melt, comparing it to the theoretical extremes of fully crystalline and fully amorphous (indicate tm and tg)
Answers: 2
You know the right answer?
A cylindrical vessel of diameter D drains through an orifice of diameter DO at the bottom of the ves...
Questions
question
Biology, 01.11.2020 21:50
question
Mathematics, 01.11.2020 21:50
question
Mathematics, 01.11.2020 21:50
question
Mathematics, 01.11.2020 21:50
Questions on the website: 13722363