Engineering, 08.05.2021 03:30 dollangellface22

As a Professional Engineer in an environmental engineering firm, you are asked to provide an outline of steps in designing a storm water detention facility for a neighborhood watershed. The outflow from the detention pond needs to be taken under a road through a culvert. You are given: (a) the USGS topography map, (b) NRCS soil survey and land use map and c) road elevation and tailwater elevation. Based on this information briefly guide me through the process of developing a detention pond and the culvert for this urban watershed.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Courses that are developed by subject matter experts, internal or extemal to the college or university. these programs are marketed by the school (clo2) marks a)-vocational schools b)-vendor training c)-colleges & universities d)-continuing education programs

Answers: 2

Answer

You know the right answer?

As a Professional Engineer in an environmental engineering firm, you are asked to provide an outline...

Questions