Engineering, 08.05.2021 15:20 NickWinston8712

Zone, N = (sum of digits of your student id)% 8 For example, if your student id is 17301283, zone = (1+7+3+0+1+2+8+3) % 8 = 25 % 8 = 1 Derive midpoint line drawing algorithm for a line in zone N. If you find zone 0, i. E., then drop the last digit from sum and take % 8 again. If your student id is 16240524, zone = (1+6+2+4+0+5+2+4)%8 = 24%8 = 0 Updated zone by removing last digit 4 = (1+6+2+4+0+5+2)%8 =20%8 = 4 Derive midpoint circle drawing algorithm for the arc of the circle in zone N. If you find zone 1, i. E., then drop the last digit from sum and take % 8 again. If your student id is 17301283, zone = (1+7+3+0+1+2+8+3)%8 = 25%8= 1 Updated zone by removing last digit 3 = (1+7+3+0+1+2+8)%8 = 22%8= 6

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

Answer

Engineering, 06.07.2019 02:30

Air (c-1.006 kj/kg.k, r-0.287 kj/kg.k) enters a nozzle steadily at 280 kpa and 77°c with a velocity of 50 m/s and exits at 85 kpa and 320 m/s. the heat losses from the nozzle to the surrounding medium at 20°c are estimated to be 3.2 kj/kg. determine (a) the exit temperature and (b) the total entropy change for this process. solve this problem using constant specific heats.

Answers: 1

Answer

Engineering, 06.07.2019 03:20

What is the maximum height from which a mass of 30 kg can fall on to a flange on the lower end of a vertical rod of length 1.0 m and diameter 20 mm, the upper end being rigidly fixed, if the stress in the rod is not to exceed 80 mpa? the tensile modulus of the rod is 200 gpa.

Answers: 3

Answer

Engineering, 06.07.2019 04:10

Aspherical thermocouple measurement errors a spherical thermocouple made of constantin transfer coefficient between the gas and the thermocouple is h used to measure the temperature of a gas. the heat 400 w/m2 k. calculate the maximum diameter d of the thermocouple if the thermocouple's measurement error should be w 23 within 5% of the initial temperature difference in 5 seconds. for constantin, k 8920 kg/m3, and c 410 j/kg. k.

Answers: 3

Answer

You know the right answer?

Zone, N = (sum of digits of your student id)% 8 For example, if your student id is 17301283, zone =...

Questions