Engineering, 10.05.2021 16:10 stump76

The stamping division at Bass Auto Works performs all necessary metal stamping operations for body panels. This is a 16 hour/day, 240 days/year operation. Currently, there are 30 stamping lines. Data on the breakdown and repair times of the lines has been analyzed by a group of Senior Design Students at State College. They determined that it was reasonable to assume that both are exponentially distributed. The mean time to failure for a single stamping line was found to be about 6.5 hours. The division currently employs 4 repairmen who work in teams of 2. When a stamping line breaks down, a single team is sent to repair it. The average repair time for a stamping line is about 4 hours. Required:
a. Develop a model for this system. Define states and events.
b. How many repair crew is needed to meet the assembly demand?

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0

Answers: 3

Answer

Engineering, 04.07.2019 19:10

The proportional limit is always greater than the yield strength for a material. a)-trune b)- false

Answers: 3

Answer

You know the right answer?

The stamping division at Bass Auto Works performs all necessary metal stamping operations for body p...

Questions