Engineering, 14.05.2021 03:20 mariaramirez013
A helical compression spring is fabricated from ASTM A229 oil-quench-tempered cold-drawn steel wire having a diameter d = 0.9 mm, a modulus of rigidity G = 80 GPa, and a modulus of elasticity E = 200 GPa. The spring has 14.5 active coils with a mean diameter D = 10 mm. The ends are squared-and-ground. The spring is supported between flat parallel surfaces (fixed ends).
Required:
a. Determine the spring rate.
b. Determine the minimum hole diameter for the spring to operate in.
c. Determine the total number of coils needed.
d. Determine the solid length.
e. Determine a static factor of safety based on the yielding of the spring if it is compressed to its solid length.
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 19:10
Plan an experiment to measure the surface tension of a liquid similar to water. if necessary, review the ncfmf video surface tension for ideas. which method would be most suitable for use in an undergraduate laboratory? what experimental precision could be expected?
Answers: 2
Engineering, 05.07.2019 19:10
Tech a says never use a water hose to clean up dust after a repair. tech b says never use a floor scrubber to clean up dust after repairs. who is correct?
Answers: 1
Engineering, 06.07.2019 03:20
Areaction-bonded silicon nitride ceramic has a strength of 250 mpa and a fracture toughness of 3.4 mpa(m)^1/2, what is the largest-sized internal flaw that this material can support without fracturing? (use y -1 in the fracture-toughness equation.)
Answers: 3
You know the right answer?
A helical compression spring is fabricated from ASTM A229 oil-quench-tempered cold-drawn steel wire...
Questions
English, 26.12.2020 23:10
Mathematics, 26.12.2020 23:10
Mathematics, 26.12.2020 23:10
Mathematics, 26.12.2020 23:10
English, 26.12.2020 23:10
Medicine, 26.12.2020 23:10
Mathematics, 26.12.2020 23:10
Physics, 26.12.2020 23:10
