Engineering, 17.05.2021 20:00 maraa013001

Question #3 Multiple Choice
What is the following passage saying about the relationship between sustainability and responsibility?
How green is Green? When we brand certain products or services as "green," "renewable," or "sustainable," that label can't just consider
those products or activities along a single axis. A biofuel that doesn't depend on petroleum to produce and refine but that requires
massive overproduction of certain crops which wreck the water table is not "green." A process that relies on production that is local but
also wasteful is not "green."
Sustainability is not just about he thing but about many things coming together.
o We should only consider products or services to be green if their broad impact can be considered so.
O We should not market products and services as green, renewable, or sustainable.
It is likely that no product or service is really green if we carefully consider its ramifications,

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The higher the astm grain size number, the finer the gran is. a)-true b)-false

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency

Answers: 1

Answer

Engineering, 04.07.2019 19:10

With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.

Answers: 1

Answer

You know the right answer?

Question #3 Multiple Choice
What is the following passage saying about the relationship betwe...

Questions