subject
Engineering, 18.05.2021 18:50 yoangel9183

An industrial plant discharges treated effluent into the New River. The effluent becomes instantaneously and completely mixed with the New River and the BOD of the mixture is 24 mg/L, the DO is 5.5 mg/L, and the saturated DO is 9.2 mg/L. The deoxygenation rate coefficient (kd) is 0.24/day and the reaeration rate coefficient (kr) is 0.71/day (both already corrected for temperature). The river is moving with a velocity of 1 m/s and a flow of 18 m3/s. The minimum DO occurs 133 km downstream of the industrial plant effluent discharge. Find the minimum downstream DO in mg/L.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
question
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
question
Engineering, 04.07.2019 19:20
Air enters a horizontal, constant-diameter heating duct operating at steady state at 290 k, 1 bar, with a volumetric flow rate of 0.25 m°/s, and exits at 325 k, 0.95 bar. the flow area is 0.04 m2. assuming the ideal gas model with k = 1.4 for the air, determine (a) the velocity at the inlet and exit, each in m/s, and (c) the rate of heat transfer, in kw flow rate, in kg/s, (b) the mass kg 0.3
Answers: 2
You know the right answer?
An industrial plant discharges treated effluent into the New River. The effluent becomes instantaneo...
Questions
question
Mathematics, 07.01.2021 05:20
question
Mathematics, 07.01.2021 05:20
question
Biology, 07.01.2021 05:20
question
Mathematics, 07.01.2021 05:20
Questions on the website: 13722359