subject
Engineering, 21.05.2021 05:30 lesly0913

1) Una espira circular hecha de material conductor elástico estirado tiene un radio de 1.23 m. Se pone en un plano formando ángulos rectos con un campo magnético uniforme de 785 mT. Cuando se suelta, su radio empieza a disminuir a una velocidad instantánea de 7.50 cm/s. Calcule la fuerza electromotriz inducida en la espira en ese momento. 2) En 1929, por primera vez, M. R. Van Cauwenberghe logró medir por vez primera directamente la corriente de desplazamiento id entre las placas de un capacitor de placas paralelas al que se aplicaba una diferencia de potencial alterna, según se indica en la figura. Utilizó placas circulares cuyo radio efectivo medía 40.0 cm y cuya capacitancia era de 100 pF. La diferencia de potencial tenía un valor máximo de ΔVm de 174 kV a una frecuencia de 50.0 Hz. a) ¿Cuál era la corriente máxima de desplazamiento entre las placas? b) ¿Por qué era tan grande la diferencia de potencial aplicada que se escogió?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
question
Engineering, 04.07.2019 18:20
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.
Answers: 2
question
Engineering, 04.07.2019 19:10
Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.
Answers: 2
question
Engineering, 04.07.2019 19:10
Which of the following is the most important advantage of a large field of view? a. allows larger areas to be examined b. relieves eyestrain c. minimizes parallax errors. d. increases precision in proportion to the in- crease in field of view
Answers: 2
You know the right answer?
1) Una espira circular hecha de material conductor elástico estirado tiene un radio de 1.23 m. Se po...
Questions
question
Mathematics, 02.03.2021 22:50
question
Mathematics, 02.03.2021 22:50
Questions on the website: 13722360