When trying to determine plumb or level, the
contact the surface
of the level should
1...
Engineering, 25.05.2021 16:00 ruffnekswife
When trying to determine plumb or level, the
contact the surface
of the level should
1 face
2 edge
3 end
4 all the above
Answers: 3
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Engineering, 04.07.2019 18:20
Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k
Answers: 2
Engineering, 04.07.2019 18:20
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.
Answers: 2
Mathematics, 22.05.2020 19:01
Mathematics, 22.05.2020 19:01
Advanced Placement (AP), 22.05.2020 19:01
Mathematics, 22.05.2020 19:01
Mathematics, 22.05.2020 19:01
Mathematics, 22.05.2020 19:01
History, 22.05.2020 19:01
Business, 22.05.2020 19:01
Mathematics, 22.05.2020 19:01
Mathematics, 22.05.2020 19:01
Biology, 22.05.2020 19:01