Engineering, 25.05.2021 18:40 chimwim8347
The open-circuit and shot-circuit tests are performed on a 240-kVA, 4800/240-V, 60-Hz transformer. The obtained data are as follows. Voltage, V Current, A Power, W Open-circuit test 240 9.7 1440 Short-circuit test 188.6 50.2 2625 1) Determine the parameters of the approximate equivalent circuit as referred to the high-voltage side. Draw the circuit showing the pertinent parameters. 2) Find the efficiency when the transformer is operating at 97% of its rated load, 0.78 power factor lagging and rated terminal voltage. 3) Calculate the load kVA at maximum efficiency and the transformer efficiency for this load kVA at 0.78 power factor lagging.
Answers: 2
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
The open-circuit and shot-circuit tests are performed on a 240-kVA, 4800/240-V, 60-Hz transformer. T...
Mathematics, 05.06.2020 18:01
Mathematics, 05.06.2020 18:01
Mathematics, 05.06.2020 18:01
Mathematics, 05.06.2020 18:01
Mathematics, 05.06.2020 18:01