Engineering, 28.05.2021 23:40 cj31150631
The viscous PDMS (Polydimethylsiloxane) coated on the glass
(Sylagard 184, Dowcoaning) is using the spin coating material. If we fix
the viscosity, density of coating material, initial thickness at 4000 cP, 965
kg/m3 and 0.105 cm, and then, the rotation time is fixed at time of 300s
and the rotation of device start from 500 to 6000 RPM. Calculate the final
thickness of the film at angular speed from 500-6000rpm (step by
500rpm) and draw the relationship between the final thickness (h) and
angular speed (Ο).
CAN ANY ONE HELP
LAB OF MEMS DESIGN
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 18:10
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500Β°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Engineering, 04.07.2019 19:10
The maximum shear stress and maximum flexural stress occur at the same location along a beam subjected to a non-uniform bending load. a)-trune b)- false
Answers: 2
You know the right answer?
The viscous PDMS (Polydimethylsiloxane) coated on the glass
(Sylagard 184, Dowcoaning) is using the...
Questions
Mathematics, 26.02.2021 22:40
Arts, 26.02.2021 22:40
History, 26.02.2021 22:40
English, 26.02.2021 22:40
Chemistry, 26.02.2021 22:40
Mathematics, 26.02.2021 22:40
