1. For the truss below show all work to determine the magnitude of external reaction forces and of the internal forces in each of the members. Include a Member Summary Table and a Final FBD that shows all the external forces along with each internal beam force (indicate whether Tension or Compression). Follow the step-by-step procedures outlined in the class handout. (100points)

Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false

For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.

Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.