Engineering, 08.06.2021 07:00 KnMcdonaldk93906

This is construction plz do the key terms I’ll do anything 5. define key terms make sure you include a) all the definitions b.) phonetic spelling (fa net' tic) (c.) kind of word (noun, verb, adjective, etc..) d.) origin of the word [L][OF ] [ME], etc... e.) year of the word (1650) (17c) etc... f.) variation of the word prefix, suffix, ed, ing, tion, etc...

1.combustible

2. non-combustible
3. fire restoration
4. fire resistive
5. poured concrete
6. ventilation
7. laminate
8. attached home
9. detached home
10. mercantile
11. mercantilism
12. sealant
13. residential
14. commercial
15. institution
16. Industry
17. industrial
18. assemble
19 block concrete
20. masonry

21. Tilt-slab
22. Sheathing
23. veneer
24. joist
25. mezzanine
26. collar tie
27. King's row
28. arched lintels
29. mucilage
30. japaning
31. stability
32. discern
33. iterate
34. anonymize
35. thematic

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.

Answers: 2

Answer

You know the right answer?

This is construction plz do the key terms I’ll do anything 5. define key terms make sure you include...

Questions