FIND THE ACCELERATION ON THE POINT A USING THE METHOD OF LAGRANGE EQUATION THE SECOND KIND
...
Engineering, 09.06.2021 18:00 727
FIND THE ACCELERATION ON THE POINT A USING THE METHOD OF LAGRANGE EQUATION THE SECOND KIND
Answers: 2
Another question on Engineering
Engineering, 06.07.2019 04:10
Cold water (cp=4180j/kg k) leadıng to a shower enters a thin-walled double-pipe heat transfer at 15c at a rate of 0.25kg/s and is heated to 45c by hot water (cp=4190j/kg k) that enters at 100c at the rate of 3kg/s. if the overall heat transfer coefficient is 950w /m2 k , determıne the rate of heat transfer and the heat transfer surface area of the heat exchanger using e - ntu method
Answers: 1
Engineering, 06.07.2019 04:30
State two advantages and two disadvantages of interchangeability.
Answers: 3
Engineering, 06.07.2019 05:10
An electric cable of 10 mm in diameter is to laid in atmosphere at 20°c. the estimated surface temperature of the cable due to heat generation is 65°c. find out ther maximum percentage, increese in heat dissipated when the wire is insulated with rubber having k =0155 w/m-k. take h=8.5w/m^2.k
Answers: 2
Engineering, 06.07.2019 05:20
The inner surface of a 0.25m thick brick wall of a furnace is kept at 810ºc, when the outside surrounding air is at 22ºc. the convective heat transfer coefficient of the outer surface is 12 w/m2k and the thermal conductivity of the brick is 0.865 w/mk.neglect the convective resistance for the inner side of the furnace and assume that the problem is steady state and thermal radiation is neglected. (a)-sketch the system and calculate the rate of heat loss per unit wall area. (b)-calculate the temperature of the outer wall surface.
Answers: 2
You know the right answer?
Questions
Biology, 30.08.2020 01:01
Spanish, 30.08.2020 01:01
History, 30.08.2020 01:01
