Treat the structure as weightless with only a single force, P, applied vertically at the rigid disc. The disc ismounted to a torsional spring (shaft) and attached to a beam using a flexible cable.1. Identify all support reactions. What is the degree of static indeterminac

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.