Engineering, 10.06.2021 17:00 imeldaa5009
Two 20-mm steel plates are to be clamped together with a bolt and nut. Specify a bolt to provide a joint constant C between 0.2 and 0.3
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
Engineering, 04.07.2019 18:10
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Engineering, 04.07.2019 19:10
Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?
Answers: 3
You know the right answer?
Two 20-mm steel plates are to be clamped together with a bolt and nut. Specify a bolt to provide a j...
Questions
Social Studies, 29.08.2019 15:30
Health, 29.08.2019 15:30
Mathematics, 29.08.2019 15:30
Health, 29.08.2019 15:30
English, 29.08.2019 15:30
History, 29.08.2019 15:30
Biology, 29.08.2019 15:30
Biology, 29.08.2019 15:30
Biology, 29.08.2019 15:30
Social Studies, 29.08.2019 15:30
Geography, 29.08.2019 15:30
