The fracture toughness of a stainless steel is 137 MPa*m12. What is the tensile impact load sustainable before fracture that a rod can withstand with a pre-existing surface crack of 2 mm, given a square cross-section of 4.5 mm on each side, in kiloNewtons

7.7 kN

Explanation:

The capacity of a material having a crack to withstand fracture is referred to as fracture toughness.

It can be expressed by using the formula:

where;

fracture toughness K = 137 MPa

geometry factor Y = 1

applied stress = ???

crack length a = 2mm = 0.002

∴

Now, the tensile impact obtained is:

P = A × σ

P = 1728.289 × 4.5

P = 7777.30 N

P = 7.7 kN

the warning light flashes for a second or two when the engine starts. if it stays on, there's must be something wrong with the coolant. you should never dare to continue driving when the light is on. pull over as soon as possible and shut the engine off.

hope this is what you're talking about

answer:

put more,